Boiler-room for pellet boiler

1. Boiler-room with pellet silo 500l

Legend:

1 – chimney
2 – flue way
3 – boiler
4 – pellet burner
5 – conveyer
6 – silo

2. Boiler-room with built-in pellet silo 3m3

3m3 built-in pellet silo which contain 1950kg of pellets. For this lay-out is used 1,5m (2,5m) pellet conveyer. The segmental opening is prepared for easy access to the silo. The segmental opening can be adapted for different level of pellets in the silo. In the upper part of the built-in silo are two openings for possible filling of pellets from other silo.

For optimal falling of pellets the inner walls of the silo should be at least 45°. All three walls should be directed at the lowest point of the silo from which the aworm-conveyer picks the pellets up.

Legend:

1 – boiler
2 – pellet burner
3 – conveyer
4 –pellets
5 – segmental opening
6 - openings for possible filling of pellets from other silo

3. Boiler-room with built-in pellet silo 5m3

5m3 built-in pellet silo which contain 3250kg of pellets. For this lay-out is used 1,5m (2,5m) pellet conveyer. The segmental opening is prepared for easy

For optimal falling of pellets the inner walls of the silo should be at least 45°. All three walls should be directed at the lowest point of the silo from which the aworm-conveyer picks the pellets up.

Legend:

1 – boiler
2 – pellet burner
3 – conveyer
4 – pellets
5 – segmental opening
6 - openings for possible filling of pellets from other silo

4. Boiler-room with pellet silo 500l and a pneumatic pellet feeder from external pellet silo outside the boiler-room

500l pellet silo which contain 325kg of pellets on which the pneumatic feeder is fitted (cyclone, ventilator and control unit). The pneumatic feeder serves for automatic feeding of the smaller silo in the boiler-room from the external pellet silo of any size (standard 3-5m3) outside the boiler-room.

This system uses pellets diameter 4-10mm from outside silo. Can be in max. distance of 15m with the camber max. 6m.
Power output = feeding amount of pellets is 8-12kg/min. Power consumption of the pneumatic feeder is 1650W. this device does not run permanently but only in case of emptying of the pellet silo in the boiler-room

Legend:

1 – boiler
2 – pellet burner
3 – conveyer
4 – pellet silo
5 – cyclone with control unit
6 – suction ventilator
7,8 – piping
9 – suction sensor
10 – textile-steel silo (3-5m3)

5. Pellet silo 250l, 500l, 1000l

Legend:

1. side hood (4pcs)
2. silo bottom (1-2pcs)
3. inclined plane (1-2pcs)
4. frame (0-2pcs)
5. top cover (1-2pcs)
6. lid of the hole for horizontal feeder (1pc)
7. reduction for different diameter (1pc)
8. handrail (1-2pcs)

6. Fitting of the pneumatic feeder on the pellet silo

When ordering it is necessary to specify what type of silo the pneumatic feeder will be fit on.

Legend:

1A. pneumatic feeder-cyclone, regulation (1pc)
1B. pneumatic feeder, fitting piece (1pc, supplied with the feeder)
2. pellet silo (1pc)
3. top cover of the silo for pneumatic feeder
4. checking cover (1pc)
5. hole blinder (1pc, supplied with the feeder)
6. screw M5x30 (4pcs, supplied with the feeder)
7. washer M5 (4pcs, supplied with the feeder)
8. screw nut M5 (4pcs, supplied with the feeder)
9. handrail (1pc)
10. screw M8x30 (2pcs)
11. washer M8 (2pcs)
12. screw nut M8 (2pcs)

7. Big textile pellet silo

Pellet silos TZ are made of special textile and they are determined for central storing of pellets. The bottom part is made to ensure the pellets could freely fall into one collecting tank where you can fit the pneumatic or auger feeder on. Simple steel construction ensure easy assembling and disassembling of the silo. Before assembling you do not need to do any structural modifications of the storing room. You need only harder floor. The silos are made in three different sizes. And two types of filling them. Top opening or side opening (connection to the filling pipe – Storz type A). Type and size of the silo is easy to set: 1kW of needed output = 0,55m3 (358kg) pellets/year.

Type Capacity (m3) Side (mm) Height (mm)
T Z 5 5 2 200 2 200
T Z 3
3 2 000 1 800
T Z 1 1,5 1 400 1 500

 

 


The Latest News

High-efficiency circulation pumps

Pricelist

Equithermal regulation

Accessories for boilers

Other 42 recommended configuration of installation

Boiler-room for pellet boiler

Exhibitions where you can find us

19.1. - 22.1.
Infotherma - Ostrava

11.2. - 14.2.
Moderní vytápění - Praha

10.2. - 13.2.
Aquatherm - Nitra

7.2. - 15. 2.
Haus,Garten - Lipsko

25.2. - 1.3.
Energiesparmesse - Wels

4.3. - 6.3.
EUREXPO - Lyon

10.3. - 14.3.
ISH - Frankfurt

13.5. - 17.5.
Hobby - České Budějovice

20.8. - 23.8.
Agrokomplex Nitra

27.8. - 1.9.
Země Živitelka - Č.B.

11.9. - 19.9.
Zahrada Čech Litoměřice

15.9. - 19.9.
For Therm - Praha

28.10. - 30.10.
SHKG - Lipsko

8.11. - 14. 11.
Agritechnica - Hannover

Useful Links

 

ISO

ISO 14001
ISO
14001
ISO 9001
ISO
9001
ISO 18001
ISO
18001